Utica/Rome Signal Meet 2019

Had some fellow signal collectors up. We went on the hunt for cool signals and any other old stuff we could find. Was a really good time! Just a start. I’ll be adding more soon.

Downtown Utica, NY.
These beautiful old buildings will soon be bulldozed in the name of “progress” (it’s a joke) to build a hospital downtown. 2 blocks of downtown will see the wrecking ball soon. Very sad.

Railroad Street Bridge, Rome, NY.
Beautiful bridge built in 1900. Thankfully the City of Rome will do some rehab on it vs tearing it down.

Higginsville Road Bridge

This bridge has been closes for about 8 years now. The town got a grant to replace it. It was a nice bridge but structurally unsound. Here’s the Bridgehunter page about it.

Lock 20 Barge Canal, Marcy NY

Haven’t been to one of these since I was a kid. We had a great time there and the lock master was a cool guy showing us all kinds of stuff.

Herkimer Road, Utica, NY

Herkimer, New York.

Some real classics here. Command lenses, signals from the 1930’s +/-

Frankfort, NY

Rome, NY

Tipperary Hill & Syracuse, NY

Crouse Hinds Porthole Signal

Picked up another new signal. Been a few months. This one joined the gang in May 2019. This one was on my bucket list for a long time. It’s a Crouse Hinds Type T or Porthole Signal. It was being sold by someone less than 30 minutes away so that was a great plus.

A little bit of a description of the signal:
Crouse-Hinds’ first known signal design, the Type T used porthole doors, where instead of the hinges seen today, each door was actually a round lens frame with a visor screwed on and tabs for thumb screws. The thumb screws could be loosened, and the frame would come away from the signal body to allow access to the bulb, reflector, and lens tabs. The earlier signal bodies were solid housings instead of sections used in later models. This meant the amount of indications couldn’t be changed after production. Later Type T models used sectioned sides.

The signal it’s self is in pretty amazing shape. Produced probably in the mid to late 1920’s to early 1930’s. I always ask the seller if there was any history of it they can tell me about.

The seller got it from someone in Forestport, NY. Thats not too far from Utica/Rome where I am. The original owner had it for 30+ years in storage and was going to hang it up at some point and never did.

From the was the visors are on this with the long tunnel yellows, I really think it could be from Utica, NY. Utica had a thing for doing this on their signals. Many of them had or still have the different configuration on the yellows. I do remember at least 6 or so Porthole signals installed in Utica up until the late 1990’s. I’d rattle off the intersections they were at, but that would make me look a bit odd I guess lol.

Crouse Hinds Porthole Signal

This Porthole above was at the corner of Genesee Street and Emerson Ave in Utica. Notice the light has the same look with the visors as the light I got.

Overall the signal is in pretty amazing shape. I have a feeling it was stored for more than the 30 years. The wiring inside is original and looks to be in wonderful shape.

The glass reflectors aren’t pitted and really aren’t dirty either. Wherever this thing was stored it must have been a dry cool place for the shape it’s in.

The Command Lenses are in pretty good shape also. They are called “command” lenses since the have either STOP, CAUTION or GO embossed into them. These were on most of the early Crouse Hinds signals. 1 of the GO is missing and 1 is cracked. 1 of the STOP lenses is cracked and half of it is missing. I do have some in another signal that can fill the void.

Just like the other signals, I’ll end up keeping it as is. For it’s age, it is in amazing condition. I’ll have to test the wiring and replace what is needed. Once I figure out how it was wired also. There’s 8 wires coming out of it. Normally for a 12 light signal there is 7. The 6 hot wires and 1 common ground. So I figure i’ll blow a few fuses and maybe get a small shock or 2 while I figure it out.

I’ve got another old Crouse Hinds GS controller from downtown Utica, NY that was from this intersection that I can get running and it would look great with this old beauty of a signal.

After a few weeks of it sitting around, I decided to get to work on it. Took all the lenses and visors off. It wasn’t too much effort

Another traffic light in the kitchen. Good thing I removed the island a few years ago

It really didn’t take much work. I had to cut off about 10″ of the existing wiring that was visible outside the hanger. It was frayed from age. On the indide, you’d never know they light was born around 90 years or so ago. The wiring is in great shape.

Frayed wires in the hanger
Inside wiring

I ended up hooking it up to the PCN Controller from Utica, NY I got last year. Amazingly I didnt get shocked and hooked it up correctly the first time.

All wired up and back functioning once again.